WHITE GREASE WITH A HIGH PERFLON CONTENT®
NSF H1-CERTIFIED LUBRICANT FOR AGRO-FOOD INDUSTRIES
HIGH FILM FORMING CAPACITY, EXTREME PRESSURE,
ANTI-WEAR, ANTI-CORROSION
EXCELLENT RESISTANCE TO WATER SPRAY AND STEAM
LONG-LASTING LUBRICANT FOR MECHANICAL COMPONENTS
WITH A HIGH NUMBER OF OPERATING CYCLES
DESCRIPTION
Clean grease, odourless, flavourless, for the lubrication of any open mechanisms in
agro-food and clean industries.
High solid lubricant content with a high film-forming capacity.
Specially developed for the lubrication of mechanical components subject to significant vibration and shearing effects. Long-lasting lubrication.
In aerosol form for use on moving mechanisms or parts.
FIELDS OF USE
Conventional geared transmissions, straight gearing, cylindrical gears, worm gears.
Information transmission, cams, tappets.
Guide systems, columns, slide rails.
Pumps, valves, block or gate valves.
TYPICAL PHYSICO-CHEMICAL PROPERTIES
|
PHYSICAL PROPERTIES OF THE GREASE |
|||
|
PROPERTIES |
STANDARD OR METHOD |
VALUE |
UNIT |
|
Appearance |
visual |
smooth, viscous |
nm |
|
Colour |
in |
white |
nm |
|
Apparent density at 25°C (pycnometer) |
NF T 30 020 |
920 |
kg/m³ |
|
NLGI Class |
NLGI National Lubricating Grease Institute |
2 |
Classification |
|
Thickener |
- |
Inorganic |
- |
|
Solid lubricant content |
- |
PTFE 10µ |
10% |
|
Penetrability at 25°C Non-worked Worked, 60 strokes Worked, 1,000 strokes Worked, 10,000 strokes Worked, 100,000 strokes |
NF ISO 2137 / ASTM 2176
|
265-295 265-295 265-295 285-315 290-320 |
1/10° mm 1/10° mm 1/10° mm 1/10° mm 1/10° mm |
|
Dropping point Dropping point if greater than 360°C |
NF ISO 2176 / ASTM D 566 ASTM D 2265 |
Without Infusible |
°C
|
|
Impurities > 25 µm > 75 µm > 125 µm |
FMTS 791 3005 |
0 0 0 |
nb/ml nb/ml nb/ml |
|
PHYSICO-CHEMICAL PROPERTIES OF THE BASE OIL |
|||
|
PROPERTIES |
STANDARD OR METHOD |
VALUE |
UNIT |
|
Type of base oil |
- |
Mineral |
- |
|
Kinematic viscosity at 40°C Kinematic viscosity at 100°C |
NF EN ISO 3104 |
100 70 |
mm2/s mm2/s |
|
Acid value (AV) |
NF ISO 6618 |
0.0 |
mg KOH/l |
|
PERFORMANCE PROPERTIES |
|||
|
PROPERTIES |
STANDARD OR METHOD |
VALUE |
UNIT |
|
Oil separation, 7 days at 40°C (bleeding) |
NF T 60 191 |
0 |
% of mass |
|
Oil separation 24 hours at 41 kPa (bleeding under pressure) |
ASTM D 1742 |
4 |
% of mass |
|
Sulphated ashes |
NF T 60 144 |
0.1 |
% of mass |
|
Copper strip corrosion |
ASTM D 4048 |
1a |
Rating |
|
Hoffman oxidation |
ASTM D 942 |
5 |
psi |
|
Loss by evaporation 22 hours at 121°C |
ASTM D 972 |
6 |
% of mass |
|
Noack evaporation loss |
NF T 60 101 CEC L-40 A-93 ASTM D5800 |
7.5 |
% of mass |
|
Elastomer swelling 70h at 212°F |
ASTM D 4289.83 |
2 |
Dimensional variation % |
|
Temperature ranges Continuous Peak |
- - |
-20 +160 -20 +170 |
°C °C |
|
Rotation factor |
n.dm |
150,000 |
mm/min-1 |
|
4-ball test Wear scar diameter Wear load index |
ASTM D 2266 / ISO 20 623 |
0.68 2150 |
mm N |
|
TIMKEN Test |
ASTM D 2509 |
35 |
lbs |
|
EMCOR rust prevention test Dynamic Static |
NF T 60 135 ISO DP 6294/ ASTM D 1743 |
1 1.5 |
Rating Rating |
|
Resistance to water washout at 80°C |
ASTM 1264 |
7 |
% of mass |
* not measured or non-measurable
INSTRUCTIONS FOR USE
Shake the spray can vertically for a few moments after the ball in the can becomes detached.
Spray at a distance of 15 to 25 cm depending on the size of the mechanism to be lubricated.
PRESENTATIONS
|
|
Aerosol 650 ml
|
|
Cartridge 430 ml |
.jpg)
.jpg)
.jpg)
Product suitable for agro-food industries (IAA)
Consistent with an HACCP approach or method
Risk analysis, Critical issues for risk management
ISO 22000 CODEX ALIMENTARIUS
NSF category:
H1 lubricant: can be used in areas in which food is manufactured. Can be used as a lubricant, anti-corrosion agent, non-stick agent for tank door hinges, lubricating grease for equipment in areas with potential contact with foodstuffs.
Looking for another product?
|
Discover our entire IAA range by clicking on the photo |
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 